BUC5IC-400CM TE-Cooling M52/C-mount USB3.0 CMOS Microscope Camera (GSENSE400BSI Sensor, 4.2MP)

BUC5IC series camera adopts SONY Exmor or GSENSE with big pixel size or full-frame CMOS sensor as the image-picking device and USB3.0 is used as the transfer interface to increase the frame rate.

With the two-stage peltier cooling sensor chip to -40°C below ambient temperature. This will greatly increase the signal to noise ratio and decrease the image noise. Smart structure is designed to assure the heat radiation efficiency and avoid the moisture problem. Electric fan is used to increase the heat radiation speed.

CONSULT Leave Message info@bestscopeusa.com

Product Detail

Download

Quality Control

Product Tags

Introduction

BUC5IC series camera adopts SONY Exmor or GSENSE with big pixel size or full-frame CMOS sensor as the image-picking device and USB3.0 is used as the transfer interface to increase the frame rate.

BUC5IC series comes with advanced video & image processing application ImageView; Providing Windows/Linux/ OSX multiple platform SDK; Native C/C++, C#/VB.NET, DirectShow, Twain Control API;

The BUC5IC series can be widely used in low light environment and microscope fluorescence image capture and analysis, as well as the astronomy deep sky application.

The Basic Characteristic of BUC5IC Series

The basic characteristic of BUC5IC series can be summarized as follows:
1. Standard camera with SONY Exmor or GSENSE CMOS sensors;
2. Big pixels or full-frame sensor size;
3. Two-stage TE-cooling with controllable electric fan;
4. Sensor chip cooling up to-40°C below ambient temperature;
5. Working temperature can be regulated to specified temperature in 5 minutes;
6. Smart structure to assure the heat radiation efficiency and avoid the moisture problem;
7. IR-CUT/AR coated windows (Optional);
8. M52 x0.75 or C-mount
9. USB3.0 5Gbit/second interface ensuring high speed data transmission;
10. Up to 1000 seconds long time exposure;
11. Embedded up to 16bit hardware ISP module;
12. Including 2-D denoising and sharpening
13. Ultra-Fine color engine with perfect color reproduction capability;
14. Support the capture of video and image in software / hardware trigger mode;
15. With advanced video & image processing application ImageView;
16. Support both video and trigger modes;
17. Providing Windows/Linux/Mac OS multiple platforms SDK;
18. Native C/C++, C#/VB.NET, DirectShow, Twain control API.

BUC5IC Series Datasheet

Order Code

Sensor & Size(mm)

Pixel(μm)

G SensitivityDark Signal

FPS/Resolution

Binning

Exposure

BUC5IC-400CM

4.2M/GSENSE400BSI

(M, UV)

2.0“ (22.53x22.53)

11 x 11

3.25x108 (e-/((W/m2).s))

Peak QE 95.3% @560nm

345(e-/s/pix)

68.5dB/50dB

37@2048 x2048

37@1024 x1024

1x1
2x2

0.1ms~1000s

C: Color; M: Monochrome; UV: Ultra-violet sensitive

Other Specification for BUC5IC Series
Spectral Range	200-1000nm (The spectral response range of each model is different. Please refer to the product manual of each model for detailed parameters)
Protect Windows	IR CUT (AR protection glass is optional)
White Balance	ROI White Balance/ Manual Temp Tint Adjustment/NA for Monochromatic Sensor
Color Technique	Ultra-Fine Color Engine/NA for Monochromatic Sensor
Capture/Control SDK	Windows/Linux/macOS/Android Multiple Platform SDK (Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc)
Recording System	Still Picture and Movie (Free running mode or trigger mode)
Cooling System*	Two-stage TE-cooling System -40 °C below Camera Body Temperature
IO Interface	One optocoupler isolation input, one optocoupler isolation output, two direct connection GPIO
Operating Environment
Operating Temperature (in Centidegree)	-10~ 50
Storage Temperature (in Centidegree)	-20~ 60
Operating Humidity	30~80%RH
Storage Humidity	10~60%RH
Power Supply	DC 5V over PC USB PortExternal Power Adapter for Cooling System, DC19V, 4A
Software Environment
Operating System	Microsoft^®Windows^® XP / Vista / 7 / 8 /10 /11 (32 & 64 bit)OSx(Mac OS X)Linux
PC Requirements	CPU: Equal to Intel Core2 2.8GHz or Higher
	Memory: 2GB or More
	USB Port: USB3.0 High-speed Port
	Display: 17” or Larger
	CD-ROM

Dimension of BUC5IC Series and Connection

The BUC5IC series body, made from tough, alloy with CNC technique, ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT or AR to block the IR light or protect the camera sensor. The fan‘s vibration is minimized to the low level to eliminate the vibration caused imaging blur. This design ensures a rugged, robust solution with an increased lifespan when compared to the other industrial camera solutions.

Dimension of BUC5IC (Square) Series

Item	Specification
1	M52F ´ 0.75 thread
2	Protective window, 39 ´ 27 ´ 1.1mm, AR window for mono camera, IR-cut for color camera
3	Thermo outlet
4	Air inlet
5	Trigger (7 pin)
6	USB 3.0/ USB 2.0 port
7	DC 19V 4.74A power port, 5.5 ´ 2.1mm
8	Power LED indicators
9	System LED TEC LED
10	TEC LED indicators
11	Fan LED indicators

Packing Information of BUC5IC Series

Packing Information of BUC5IC Series(Square)

Standard Package
A	Carton L:50cm W:30cm H:30cm (20pcs, 12~17Kg/ carton), not shown in the photo (TBD)
B	3-A safety equipment case: L:28cm W:23cm H:15cm (1pcs, 2.8Kg/ box); Carton size: L:28.2cm W:25.2cm H:16.7cm (TBD)
C	One BUC5IC series camera
D	Power adapter: input: AC 100~240V 50Hz/60Hz, output: DC19 V 4A
E	High-Speed USB3.0 A male to B male gold-plated connectors cable /1.5m
F	IO cable
G	CD (Driver & utilities software, Ø12cm)
L	Calibration kit	106011/TS-M1(X=0.01mm/100Div.); 106012/TS-M2(X,Y=0.01mm/100Div.); 106013/TS-M7(X=0.01mm/100Div., 0.10mm/100Div.)